Arduino Due

Arduino Due and Si7021 temperature sensor example

The Si7021 I2C Humidity and Temperature Sensor is a monolithic CMOS IC integrating humidity and temperature sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C Interface. The Si7021 offers an accurate, low-power, factory-calibrated digital solution...

Arduino Due and I2C LCD example

In this example we will interface to an I2C LCD using our Arduino Due. Now these I2C LCD's consist of 2 parts usually an HD44780 16×2 LCD and an I2C backpack.

Arduino Due and LM35 temperature sensor

In this example we will connect an LM35 temperature sensor to our Arduino Due</p><p>The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius.

Arduino Due and GUVA-S12SD UV Sensor example

The GUVA-S12SD UV Sensor chip is suitable for detecting the UV radiation in sunlight. It can be used in any application where you want monitor for the amount of UV light and is simple to connect to any microcontroller. I recently noticed that some sellers had little...

Arduino Due and DS3231 RTC example

The DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, and maintains accurate timekeeping.

Arduino Due and a L3GD20 sensor example

The L3GD20 is a low-power three-axis angular rate sensor. It includes a sensing element and an IC interface capable of providing the measured angular rate to the external world through.

Arduino Due and MMA7455 accelerometer example

The MMA7455 accelerometer is a sensor that can measure acceleration in three axes. This sensor is commonly available as a breakout board that you can connect to your Arduino. It requires VCC, GND , SCA and SCL to be connected. Here is a picture of...

Arduino Due and MMA8451 sensor example

The MMA8451 is a low-power accelerometer with 14 bits of resolution, with the following features: Embedded functions with flexible user-programmable options, configurable to two interrupt pins Embedded interrupt functions for overall.

Arduino Due and MLX90393 magnetic field sensor example

The MLX90393 magnetic field sensor can be reprogrammed to different modes and with different settings at run-time. The sensor offers a 16-bit output proportional to the magnetic flux density sensed.

Arduino Due and a TSL2561 Luminosity Sensor example

The TSL2560 and TSL2561 are second-generation ambient light sensor devices. Each contains two integrating analog-to-digital converters (ADC) that integrate currents from two photodiodes. Integration of both channels occurs simultaneously. Upon completion of the conversion cycle, the conversion result is transferred to the Channel 0 and...

Arduino Due and DS1624 temperature sensor example

The DS1624 consists of two separate functional units: a 256-byte nonvolatile E2 memory and a direct-to-digital temperature sensor. The nonvolatile memory is made up of 256 bytes of E2 memory..

Arduino Due and MMA7361 accelerometer example

The MMA7361L is a low power, low profile capacitive micromachined accelerometer featuring signal conditioning, a 1-pole low pass filter, temperature compensation, self test, 0g-Detect which detects linear freefall, and g-Select.

← Previous 1 2 3 4 5 Next →