The Si7021 I2C Humidity and Temperature Sensor is a monolithic CMOS IC integrating humidity and temperature sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C Interface. The Si7021 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point, and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms.
Features
Precision Relative Humidity Sensor ± 3% RH (max), 0–80% RH
High Accuracy Temperature Sensor ±0.4 °C (max), –10 to 85 °C
0 to 100% RH operating range
Up to –40 to +125 °C operating range
Wide operating voltage – (1.9 to 3.6 V)
Low Power Consumption – 150 μA active current
Layout
arduino due and si7021
Code
No 3rd party libraries required
[codesyntax lang=”cpp”]
#include <Wire.h>
const int ADDR =0x40;
int X0,X1,Y0,Y1,Y2,Y3;
double X,Y,X_out,Y_out1,Y_out2;
void setup()
{
Serial.begin(9600);
Wire.begin();
delay(100);
Wire.beginTransmission(ADDR);
Wire.endTransmission();
}
void loop()
{
/**Send command of initiating temperature measurement**/
Wire.beginTransmission(ADDR);
Wire.write(0xE3);
Wire.endTransmission();
Serial.print("Temp");
Serial.print("\t");
Serial.println("Humidity");
/**Read data of temperature**/
Wire.requestFrom(ADDR,2);
if(Wire.available()<=2);
{
X0 = Wire.read();
X1 = Wire.read();
X0 = X0<<8;
X_out = X0+X1;
}
/**Calculate and display temperature**/
X=(175.72*X_out)/65536;
X=X-46.85;
Serial.print(X);
Serial.print("C");
Serial.print("\t");
/**Send command of initiating relative humidity measurement**/
Wire.beginTransmission(ADDR);
Wire.write(0xE5);
Wire.endTransmission();
/**Read data of relative humidity**/
Wire.requestFrom(ADDR,2);
if(Wire.available()<=2);
{
Y0 = Wire.read();
Y2=Y0/100;
Y0=Y0%100;
Y1 = Wire.read();
Y_out1 = Y2*25600;
Y_out2 = Y0*256+Y1;
}
/**Calculate and display relative humidity**/
Y_out1 = (125*Y_out1)/65536;
Y_out2 = (125*Y_out2)/65536;
Y = Y_out1+Y_out2;
Y=Y-6;
Serial.print(Y);
Serial.println("%");
delay(300);
Serial.println();
delay(1000);
}
[/codesyntax]
Testing
Open the serial monitor and you should see something like this
Temp Humidity
21.02C 37.63%
Temp Humidity
21.76C 37.93%
Temp Humidity
26.21C 39.49%
Temp Humidity
28.65C 40.68%
Temp Humidity
29.88C 41.89%
Temp Humidity
29.51C 42.16%
Link
Wiring
