This TSL2561 is an I2C light-to-digital converter TSL2561 that transforms light intensity to a digital signal. The TSL2561 features a selectable light spectrum range due to its…
MBed
In this example we connect an LM75 to a STM32 Nucleo and we will use the MBEd compiler The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and…
In this example we connect an MS5611 to an STM32 Nucleo - in this case it was a Nucleo-F446RE This barometric pressure sensor is optimized for altimeters…
In this example we will connect an LM35 temperature sensor to our Nucleo board and we will be using the MBed compiler The LM35 series are precision…
In a previous example we showed how to connect an ML8511 to an Arduino Due, this time we are using a Nucleo board - in fact this…
In this example we take a look at the MAX6675 Cold-Junction-Compensated K-Thermocouple-to-Digital Converter and connect it to a Nucleo-F334R8 The MAX6675 performs cold-junction compensation and digitizes the signal…
The Easy Module Shield V1 is a basic shield for the Arduino which has several useful components fitted that can be used for beginners learning, here is…
The PCF8574 is an 8 bits I/O port expander that uses the I2C protocol. Using this IC, you can use only the SDA and SCL pins of…
The MLX90614 is a non-contact infrared thermometer with a measurement range from -70 to +380 degree Celsius. Just connect the four leads to your MBed supported device and…
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted as 16-bit twos…